Controles y Válvulas S.A. de C.V.

Automatización, Medición y Control

You are here: Productos por función Indicadores Flujo 5500 ProPoint® Flow Monitor
The Signet 5500 Flow Monitor is equipped with a scaleable 4 to 20 mA output and two relays programmable for high, low, and pulse operation.
Instantaneous flow rate is easy to read on the analog dial, while the backlit LCD is used for calibration, set-up and displaying totalised flow volumes. One of the two totalisers is resettable from the front panel, and can also be reset from a remote location up to 30 m. (100 ft).
The other totaliser is non-resettable and is commonly used to tally consumption, or to permanently record industrial effluent volumes.
The monitors require 12 to 24 Volts, AC or DC, and can be used with any Signet Flow Sensor with a frequency output. Our intuitive software design and four-button keypad arrangement provide for simple operation, and the NEMA 4X/IP65 integrity of the front panel can be extended to the entire enclosure by using the optional Rear Cover Kit.
Fields of Application:
  • Waste Water Flow Accumulation
  • Water Treatment Systems
  • Filtration Systems
  • Feed Pump Pulsing
  • Fertigation
  • Irrigation
  • Commercial Pools & Spas
  • Groundwater Remediation
  • HVAC
Advantages:
  • Analog and Digital display
  • Two 8-digit Totalisers: one permanent, the other resettable
  • Two Programmable Relays
  • Fully Scaleable 4 to 20 mA Output
  • Tamper proof security code
  • Non-volatile memory
  • Simple push-button operation
  • Programmable pulse outputs
  • 1/4 DIN, NEMA 4X/IP65 enclosure
Standards:
  • CE certificate
  • UL
  • CUL